Home > Products > Fiber Optics >  > Rackmount Patch Panels > 

Swingout 1U LGX Patch Panel

Stock Options

Wirewerks™ fiber optic swingout 1U LGX patch panel is equipped with a pivoting drawer that maximizes the front access so inside-panel manipulation and splices are easier to perform. The patch panel is made of 16 gauge cold rolled steel (CRS) with a powder coated finish. Adapter strips up to 48 fibers, or cassettes can be installed into the 2 LGX cut-outs using their push pin mechanism.

Cardboard box, 1 unit per box.
Physical Characteristics
Fiber count capacity
48 fibers maximum
Plastic materials
UL 94V-0 ABS thermoplastic
Panel material
16 Gauge cold rolled steel (CRS)
5.8 kg (12.8 lbs)
Overall dimensions
483 mm (19 in) x 345 mm (13.6 in) x 44.5 mm (1.75 in)
2 self-adhesive port ID labels, 1 warning labels, 1 Velcro 16-inch tie wraps, 5 Velcro 3-inch tie wraps, 6 nylon 8-inch tie wraps, 4 Philips screws 12-24/0.5-inch long, 4 Philips screws 10-32/0.5-inch long, 1 hex nuts with tooth washer for 8-32 screws
Commercial Building Standard for Telecommunications Pathways and Spaces.
Cabinets, Racks, Panels and Associated Equipment standard.
Administration Standard for Telecommunications Infrastructure.
Generic Requirements and Design Consideration for Fiber Distributing Frames.
UL 94
Tests for Flammability of Plastic Material for Parts in Devices and Appliances.
Directive on Restriction of Hazardous Substances.
  • Swing out drawer for an easy front and inside panel access
  • Removable front cover
  • Fits 2 LGX adapter strips and cassettes
  • Fits 2 Next Step™ Splice Trays part number NS-SPL-24 (not included).
  • Installation hardware and instruction manual included
  • Compatible with 19 and 23 inches racks and cabinets
  • Entrance facility
  • Telecommunications room
  • Equipment room
  • Consolidation point
  • Central office

Locate Distributor