Home > Products > Copper > Patch Cords & Pigtails > 

28 AWG Copper Patch Cord

Stock Options

CAT-68AWH-001

Wirewerks CAT6 U/UTP CM 28AWG patch cords offer a high quality value solution for cable management challenges and high density applications. These patch cords are built using 28 AWG stranded annealed copper conductors and the connectors contacts are plated with 50 micro inch of gold. Their ergonomic over molded boots exhibit an improved strain relief and easy-to-press release tab. Wirewerks 28 AWG CAT6 U/UTP CM patch cords are perfect to carry Gigabit

• Cable core 4 unshielded twisted pair
• Conductors material 28 AWG stranded annealed copper
• Insulation material PE
• Jacket material PVC
• Plug material UL 94V thermoplastic
• Contacts material 50 micro inch of gold over 100 micro inch of nickel
• Boot material Polyvinyl chloride (PVC)
• Performance test 100% Component within 15ft, 100%channel above 15ft
• Operation Temperature: -20°C ~ 60°C
• Installation Temperature: -10°C ~ 50°C
• Storage Temperature: -20°C ~ 70°C
• Pulling Tension: 110 N (25 Lbf)

FCC 47, Part 68
Connection of Terminal Equipment to the Public Switched Telephone Network

ISO/IEC 11801
Generic Cabling for Customer Premises

ANSI/TIA-568-C.2
Balanced Twisted-Pair Telecommunications Cabling and Component Standards for Category 6

ASTM D4565
Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

IEC 60603-7
Connectors for Electronic Equipment

UL 444
Standard for Safety for Communication Cables

UL 94
Tests for Flammability of Plastic Material for Parts in Devices and Appliances

cULus
Bi-national (Canada, US) Listed Communication Circuit Accessories

RoHS
Directive on Restriction of Hazardous Substances

• Allows for higher number of connections in new installations as compared to traditional patch cords
• Ideal for over-crowded conduits or cable trays
• Small cord diameter of 0.15 INCHES (3.8 mm) - 44% sp ace saving compared to traditional CAT6 patch cords
• 100% tested ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E component requirements for lengths up to 15 feet
• *100% tested ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E channel requirements for lengths over 15 feet
• Available in 9 colors : grey, blue, white, green, black, yellow, red, purple and orange
• Over molded strain relief
• Connectors’ contacts plated with 50 micro-inch of gold over 100 micro-inch of nickel
• Available in multiple lengths
• T568A & T568B wiring schemes

• Telecommunications Room
• Equipment Room
• Consolidation Point
• Work Area
• Cellular Tower Base Station

Locate Distributor