Home > Products > Ethernet Active Devices >  > 10/100Base T/TX to 100Base FX Media Converters > 

10/100Base T/TX to 100Base FX Media Converters

Stock Options


Wirewerks Fast Ethernet media converters provide an easy and economical solution to upgrade a copper based network to fiber optic to extend the signal reach, or to bridge copper and optical fiber cabling by converting an electrical signal to an optical signal. Their plug-and-play design enables a quick and easy installation.

Wirewerks media converters can be used as standalone with their external power supply, or mounted in Wirewerks media converter chassis with centralized power supply.

Features & Benefits
Half or full duplex auto-negotiation.
10/100 Mbps auto-negotiation for copper port.
Auto MDI/MDI-X for copper port.
Support Link Fault Pass Through function.
Plug-and-play installation.
Extend network distance up to 60 km.
Accommodate a variety of connector types.
Power and Link status LED for monitoring and management.
19 inches rack mountable in Wirewerks media converter chassis.
External power supply.
Local Area Networks (LAN).
Enterprise Networks.
Campus Networks.
Fiber to the Building (FTTB).
Fiber to the Curb (FTTC).
Point-to-point fiber networks.

Physical Characteristics
Twisted Pair interface : RJ45
Fiber optic interface : SC or ST or LC
Twisted pair media : CAT3, CAT5e, and higher
Fiber optic media : Multimode 50/125 µm, 62.5/125 µm, single mode 9/125 µm
LED indicators :Power status, TP port, LNK/ACK, FDX/COL
Encasement material : 20 gauge Cold Rolled Steel (CRS)
Overall dimensions : 97 mm (3.82 in) x 69 mm (2.72 in) x 26 mm (1.02 in)
Weight : 0.2 kg (0.44 lb) without power supply
Mechanical Characteristics
Operating temperature : 0° C (32° F) ~ 50° C (122° F)
Storage temperature : -40° C (-40° F) ~ 70° C (158° F)
Relative Humidity : 10~90% non-condensing
Transmission Characteristics
Signal distance TP port : 100 m max.
Signal distance fiber port : Multimode ; 2 km max.
Single mode 20 km max., 40 km max., 60 km max.
Latency : <10 µs (LIFO)
Throughput at 100Base : 148,809 pps (64 byte packets)
Speed : 100Base TX: 100/200 Mbps half/full duplex
10Base T: 10/20 Mbps half/full duplex
Switching method : Store-and-forward
Maximum MAC addresses: 1,024 entries
Memory : 128 KB
Optical Characteristics
Wavelength multimode : 1310 nm (nom.), 1360 nm (max.), 1270 nm (min)
Wave length single mode : 1310 nm (nom.), 1340 nm (max.), 1270 nm (min.)
Output power multimode : -12/-22 dBm (max./min.)
Output power single mode : 20 km: -8/-15 dBm; 40 km: -3/-8 dBm; 60 km: 0/-3 dBm (max./min.)
Input power multimode : -3 dBm (max.)
Input power single mode : 20 km: -8 dBm (max.); 40 km: -3 dBm (max.); -3 dBm (max.)
Sensitivity multimode : -30 dBm
Sensitivity single mode : -38 dBm
Link budget multimode: 8 dB
Link budget single mode : 20 km: 23 dB; 40 km: 30 dB; 60 km: 35 dB
Electrical Characteristics
External power supply: 5 Volts DC, 0.8 A max.
Power consumption : 2.5 Watts max.
IEEE 802.3
10Base T Standard.
IEEE 802.3u
100Base TX Fast Ethernet Standard.
FCC part 15,Class A
Emissions and Immunity Standard.
European Conformity Standard.
Directive on Restriction of Hazardous Substances.

Locate Distributor